A Step-by-Step Guide to Car Detailing Adelaide for Complete Beginners – Delux Car

“Car detailing is only meant for the pros.” That may be what you think, but the truth is that you can actually do it by yourself. We admit that it’s no easy task, and you’ll probably go through a lot of trial-and-error. But it’s something that’s fulfilling once you get the hang of it. In this article, we at Delux Car will show you a quick step-by-step guide to DIY car detailing Adelaide. Continue reading to find out.

 

Step #1: Start with the Wheels

Always start every car-detailing job with the wheels – the dirtiest and grimiest area of any vehicle. You will need to soak your wheels with a quality cleaning product. Make sure you brush your wheels to get hard-to-remove and hard-to-reach areas. Make sure you’re using a mitt and bucket when dealing with the paintwork.

 

Step #2: Pre-Cleaner Application

Always used a pre-cleaner that’s formulated to remove both stubborn grime and insects. Spray the cleaner on the lower part of your car and areas that are infested by bugs. You can visit the official Delux Car website to shop for the best cleaners for your car.

 

Step #3: Snow Foaming

Snow foams help eliminate stubborn dirt, while also removing loose particles from the vehicle before the start of the wash stage. Make sure you remove as much dirt as you can. Check for all the nooks and crannies before you start contact washing to reduce the chances of inflicting marks to the paint finish.

 

Step #4: 2-Bucket Contact Washing

Another critical phase in car detailing Adelaide is the two-bucket method. This technique involves filling two buckets of water with good-quality car shampoo. Wash your car using these two buckets. By doing so, you will reduce the chances of any light or visible scratches or swirls from developing. The expert technicians from Delux Car never skip this method when detailing vehicles – you should, too.

 

Step #5: Decontamination

Spray an iron dissolver to dissolve any ferrous contamination like fall out and industrial rail dust that has fused itself to the paintwork. Use is a solvent tar remover to soften any tar that’s stuck on your car paint. Rewash areas of your vehicle that were treated with the solvent. Use a clay bar for easier washing.

 

Step 6: Drying and Polishing

Once the application settles, it’s time for the drying phase. Start at the top and work your way towards the bottom. Get every area streak-free. Once all parts of your car are dry, polish for the finishing touch. You can either use a cloth and do it by hand or use a machine polisher instead. For more tips and guides on how to take good care of your car, check out the Delux Car blog page.