Types of DIY Gutter Guards

You should consider installing gutter guards, screens or helmets on your roof if you are searching for a functional yet straightforward DIY project to do around your home that can also ease future laborious maintenance. You can efficiently install some types of gutter shields in minutes only depending of course on the height and style of your home. No doubt, gutter cleaning would be necessary if the gutter doesn’t have covers. So, if you desire to both reduce the frequency of gutter cleaning and the amount of time to spend on maintaining it, installing gutter guards is the right thing to do. Since cleaning and installation of gutter guards is a type of work that is usually done thru standing on a ladder or after climbing onto a roof, then, indeed it’s dangerous. To safely do the job on one-storey homes, you should use a scaffold or folding ladder. Also, if you plan to climb onto a two-storey house or taller structure, it is necessary that you use fall prevention equipment that can provide you with extreme security.

Below, we gathered a list of gutter guard types that you must consider for your convenience if you plan to install DIY gutter guards Brisbane on your own.

  1. Screen gutter guard

Vinyl, aluminium and galvanised steel are the preferred materials that come along with screen gutter guards. It allows the heavy rainwater to flow freely into the gutters while still effectively keeping all the leaves and other debris out. While most screen gutter guards are extremely durable, there are also some that are powder-coated and quickly snap into gutters without requiring any supporting arches or attachment screws. If you wish to clean small debris that may still build up, you can easily remove the screen gutter guards if necessary.

  1. Foam gutter guards    

To effectively fit into gutters, this type of guard is designed in long pieces of dense triangular or thinner, arch-shaped foam. The foam allows the water to pass through the gutter smoothly while effectively blocking flowers, leaves, twigs and any other debris from accessing the gutter system. Plus, the advantage of foam is that it is effortless and convenient to install. Inserting the pre-cut pieces inside the gutters is the only thing you have to do, and everything is set.

  1. Mesh gutter covers

If the standard mesh gutter is inserted under the shingle edge and gutter lip, it will adequately cover the entire gutter opening. To secure them on the gutter, you can install it with screws as some of it features holes tiny enough to block maple helicopters and pine needles while allowing the water to flow freely and smoothly. It is instrumental in keeping leaves out and will fit most gutters and will not be visible from the ground, and it is its most convenient attribute.

4. Whiskers gutter guards

Brush-Like whisker filters that exceptionally fit inside the gutter is what these DIY gutter guards Brisbane resembles. It is dramatically designed to prevent pine needles, leaves, acorns and other debris from congesting the gutters. Not only that, but it is also exceptional when it comes to stopping mice, rats and squirrels from accessing or worst nesting in your gutter system.